Category: Blog

• 
• by Ronald Young
• May 23, 2021

HOW TO PAINT OR STAIN A DECK USING A PAINT SPRAYER

JOB SUMMARY

If you simply included a brand-new deck or are refinishing an existing one, maintaining the deck covered will certainly safeguard the wood from the sunlight and also harsh climate.

A deck tarnish sprayer will uniformly layer outdoor decking and barriers easily. Simply applying a brand-new coat of finish to your deck can make all the difference in the look of your entire house.

Security Notification: Whenever operating spray equipment, take correct security preventative measures, stay alert, as well as be conscious of possible hazards.

Wear protective gear such as gloves, security glasses/goggles, spray sock (hood), hat, appropriate footwear, dirt masks and respirators. Always refer to the certain directions and also safety and security procedures for the spray tools you are utilizing.

Man using discolor to decking using a sprayer with pointer extension

Due to the fact that the material being sprayed as well as any type of overspray can take a trip in between open areas, cover anything below the deck or on the other side of spindles or rails. Select the spray pointer that’s ideal matched for the discolor you are utilizing and also the surface area to be splashed. When splashing lighter materials like discolorations, pick the least expensive stress establishing that enables you to preserve a great spray pattern. For the decking, work in sections just as much as you can pleasantly reach and adhere to the slabs lengthwise, keeping the spray suggestion approximately 12 inches from the surface area. Spray the outer sides first, “banding” the location that you will certainly spray, as well as after that spray any edges.

RECOMMENDED EQUIPMENTS & DEVICES

Graco, Magnum, or TrueCoat Paint Sprayer (see Paint Sprayer group web page to compare versions).
Paint/Stain.
Spray suggestions– a bigger spray pattern for huge surface areas and also narrow dimension for smaller sized surfaces (see idea selector).
Empty containers for priming sprayer and also cleaning (two needed).
Mix sticks.
Repaint filter bag– aids stop pointer plugs and also provides a better coating.
Tarps, drop cloths, or plastic sheeting.
Masking tape.
Repaint brush for touch-ups.
Magnum idea expansion– for hard-to-reach locations that would otherwise call for a ladder.
Stress roller kit (optional).
Added airless pipe sections if needed.
Spray shield.
Pump Shield storage liquid or TSL fluid (see pump protectant product details).
Cleaning up dustcloths.

GETTING STARTED/PREP.

Relocate all outdoor furnishings or any other products such as a grill far from the area to be splashed. Permit plenty of area for your tools and also devices.
Cover all neighboring shrubs, bushes and plants with plastic tarpaulins, as well as do not spray on windy days. Cover anything listed below the deck or on the other side of rails or pins since the product being splashed and any kind of overspray can travel between open spaces. Cover any type of house walls near the deck with plastic to safeguard them from overspray.
Brush up the deck of all dust. Laundry the whole deck surface area with a pressure washer, or make use of a long-handled brush or mop to apply deck cleaner. Let the cleaner set per producer’s guidelines; after that rinse and allow the surface to dry totally.

SPLASHING.

Select the spray pointer that’s ideal suited for the tarnish you are making use of and the surface to be sprayed. A suggestion with a narrower 8-inch-wide spray pattern and a. 013 opening dimension will give you the ideal control. Make sure the suggestion’s opening dimension does not exceed the optimum capability of your sprayer (see spray idea information).

If you’re using paint from several containers, mix it with each other in an empty 5-gallon container to make certain constant color even if small shade distinctions exist between individual paint canisters. When spraying lighter products like spots, choose the most affordable stress setting that enables you to preserve a good spray pattern. Lower stress setups will offer you much better control as well as a finer coating.

Beginning by spraying the railings and also deck sustains– you might need to hold the gun at an angle in order to completely spray any kind of inside surface areas. Keep a brush useful in case you require to brush out any excess-sprayed stain.

For the decking, function in areas only as much as you can pleasantly reach as well as follow the planks lengthwise, maintaining the spray idea around 12 inches from the surface area. Spray the external edges first, “banding” the area that you will certainly spray, and then spray any corners.

CLEAN-UP.

Comply with paint/stain manufacturer’s referrals and enable considerable time for the discolor or deck coating to dry.
Remove all coverings from hedges, bushes as well as plants. Very carefully remove all tape and also plastic covering from wall surfaces, home windows as well as trim.
Change any type of lighting fixtures that you got rid of and also relocate furnishings or various other products back right into location.
Tidy your airless paint sprayer after each usage. If applicable, follow the directions in your user’s guidebook for Power Flush cleaning with water based products or use the pail technique of cleaning.

For more information, see Power Flush Video clip or refer to your Sprayer Procedure Guidebook.
Return any other items (furnishings, grill, and so on) to their correct location.

• 
• by Ronald Young
• May 22, 2021

HOW TO PAINT CABINETS WITH AN AIRLESS SPRAYER

JOB REVIEW

Painting or discoloring your closets can totally change the appearance of your cooking area, washroom or any type of room in your house. Given that many rooms with closets usually get a great deal of web traffic and task, you’ll intend to get this task done fast. Making use of a Magnum airless paint sprayer will certainly give the fastest means to accomplish a perfect finish.

When this job is done right, you’ll obtain a resilient, smooth surface, with no brush strokes or various other imperfections. It’s likewise vital to get back at insurance coverage on the doors and in all the grooves as well as corners. The method which you use the surface makes all the difference in regards to how long the finish will last.

So, there’s no requirement to spend a lot of money on replacing your cupboards, when an airless sprayer supplies both the rate as well as quality to make changing your cupboards a fast and easy house improvement task.

Safety Notification: Whenever running spray tools, take appropriate security precautions, remain sharp, and be conscious of prospective hazards. Use protective equipment such as handwear covers, safety glasses/goggles, spray sock (hood), hat, proper shoes, dust masks and also respirators. Always refer to the details instructions and safety treatments for the spray tools you are utilizing.

Repainting Cabinets with a Graco Airless Sprayer
SEE: Just How to Spray Cabinets (6:28).

RECOMMENDED DEVICES & TOOLS.
Graco paint sprayer.
TrueAirless 311 airless spray pointer.
Non-flammable oil-based primer.
Latex enamel satin or semi-gloss paint or tarnish.
T. S. P. all-round cleaner.
Canvas decline plastic, paper or fabric.
Expansion cord.
Rags & waste jug.
Plastic baggies for closet equipment.
2x4s on 2 paint canisters or sawhorses.
Wood filler & putty blade.
Great grit sandpaper or fining sand block.
Tact towel.
Masking/duct tape.
Scrap cardboard.
Individual safety gear.
Paint filter & Rubber gloves.
Yard pipe.
2 flexible wrenches.
Apartment & philips screw vehicle drivers.

PREPARING THE CUPBOARDS

The first step is to start prepping the surface areas that will be repainted.

Get rid of the doors and drawer fronts from the cabinets and after that remove the hardware. Make sure to note the cabinets as well as doors to each cabinet. Location the hardware into plastic bags and keep them together, so you will not have to adjust the doors when rebuilding them to the cupboards.

If you intend to change the equipment on your cupboards with hardware that has various hole alignments, load the existing holes with timber filler. You’ll also desire any kind of surface areas you paint to be thoroughly cleaned up.

Lightly sand the doors, drawers and also cupboards by relocating with the grain of the wood to eliminate the top layer of surface. Take the time to examine all of the surface areas for harmed locations as well as spackle over nail openings and cracks. Make certain to caulk voids between wall surfaces and also cupboards to produce a seamless blend.

PREPARING THE JOBSITE.
Currently that the cupboards are prepped, prepare the task site. Bag the location of the room in which you’ll be splashing.

In an unfinished basement or garage, produce a temporary spray booth by covering the ground … and also surrounding the area with plastic. Area the cabinet doors on 2 sawhorses with 2×4 boards, to obtain them off the ground as well as approximately a comfortable angle for splashing.

PAINT/COATINGS

For best outcomes, prime all the surface areas with a non-flammable, oil-based guide and sealer. This will certainly supply a water barrier and prevent bleed-through and also breaking.
To eliminate any type of large bits or dried out debris, pour your primer with a strainer into a container. Put on some latex gloves and eject the excess primer. Disposes of the strainer as well as handwear covers. You will intend to experience this same process with the topcoat product too.

SAFETY AND SECURITY

Prior to you start splashing, make sure you have actually read all security as well as functional instructions that came with your airless sprayer as well as have proper personal security equipment, such as eye security as well as a respirator.

Always realize that airless sprayers can produce a lot of stress– commonly adequate to pierce skin. Never direct the weapon at yourself or anyone else. It’s crucial to make certain to adequately aerate your job location prior to splashing.

SPRAY SUGGESTION OPTION

For this sort of project, where the surface are small, we recommend a spray idea that provides a smaller spray fan. When splashing water-based enamel and also satin surface paint, it’s best to utilize a 311 spray idea as it will provide a 6-inch spray follower that is best for closets as well as smaller sized doors.

METHOD SPRAYING

Prior to splashing the closets, we advise exercising on an item of cardboard. This will certainly enable you to adjust your technique as well as adjust the sprayer for the best spray pattern.

Beginning each pass by holding the spray suggestion regarding 12-inches from the surface. Start and stop the weapon after each pass. Draw the weapon trigger after starting each stroke.

To aid blend each spray pass and produce a fuzzy side around the entire spray pattern, bend your wrist so the weapon stays vertical to the surface. Fanning the gun one-way or the various other will lead to uneven spray patterns. Do not overreach– simply reach as for fits.

To accomplish the best spray pattern, constantly start at the most affordable stress and slowly boost the pressure till you achieve the wanted outcomes. An excellent spray pattern will always have even, soft sides. If you have noticeable lines or “tails” at the top and also bottom of each pattern, try enhancing the stress in little increments till the edges of the pattern soften.

USING THE GUIDE

Beginning spraying the cabinet doors. Beginning at one end and spray the sides as well as inside and function your means around, splashing all of the outside structures. Spray straight over the top of the doors as well as make sure you cover every surface area.

Inside the cupboards, spray the edges initially as well as then load in the facility area. For the outside areas of the cupboards with sides, angle your gun so two-to-three spray passes will mix in the.

When the guide is entirely dry, gently sand the surfaces. Vacuum all surface areas as well as then wipe down with a tack fabric.

PREP BETWEEN COATS

It is very important to purge the old paint/coating product out of your sprayer prior to filling it with new product. Given that this job begun with a non-flammable, oil-based primer, make certain to flush the sprayer with mineral spirits. If the topcoat application will certainly be water-based, flush the sprayer again with water, prior to including the water-based topcoat material.

Spray this first topcoat of paint onto all surface areas and also after that permit the paint to totally dry prior to spraying a 2nd coat. A lot of pros do a fine sanding, vacuuming as well as cleaning with a tack towel, on all surface areas in between layers.

SURFACE

As soon as the second layer is completely dry, carefully eliminate every one of the tape, plastic as well as paper. Reinstall the hardware as well as connect the doors and also cabinets to the closets. Which’s all it requires to give your kitchen area an entirely face-lift, easy and also quick on to the next task.

To help blend each spray pass and produce a fuzzy edge around the entire spray pattern, bend your wrist so the weapon stays vertical to the surface. Beginning spraying the closet doors. Begin at one end as well as spray the sides and inside and function your means around, splashing all of the outside frames. For the outside areas of the cupboards with sides, angle your gun so two-to-three spray passes will mix in the.

Spray this first topcoat of paint onto all surfaces as well as after that enable the paint to completely dry prior to splashing a second coat.